18 Amp RGB Controller RF Colour Wheel Remote
[URGBWheel]

RGB Controller 18Amp with RF Remote

• 6 Amp per Channel (18 Amp Total)
• Remote Can be assigned to one unit or Multi Units
• Works with URGB30SA + URGB60SA +URGB150WP led tape and the RGB waterproof Block(12V)
• Controller Size L85mm x W65mm x H25mm
• Static power consumption <1W
• Complete with RF remote Control
• 15 Colour Changing Programs
• Save Colour Mode
• Brightness control + Program Speed Control
• Direct single button access to all colours
• Pause control and on and off Button
• Requires 3 x AAA batteries (Not supplied)
• for a full data sheet please email sales@ultraleds.co.uk and ask for the data sheet for URGBWheel

Notes if the controller is not working either replace the batteries

or follow the instructions below:

 Assign Controller: Press and hold Large Sun Key (Brightness up)

within 3 seconds when Power applied to silver controller.

Tape will blink white 3 times if assign  is successful.

 Clearing code! Clearing Code Press Big Sun (Brightness Up)  key five times within 3 seconds when power applied to silver controller.

The light will blink 6 times if clearing is successful.