Our Value Series tapes are manufactured using chips that produce lower light degradation and offering premium colour rendering. Printed on a thicker 2oz. PCB to help with heat dissipation, these tapes come with a strong 300 LSE 3M tape backing and have 5-core cables pre-soldered at both ends of the reel ready for hard wiring in to the compatible RGBW controller.
Plug and Play solutions are also available upon request.
This 5 metre reel can be cut to your desired length at any of the allocated cut points.
Sold with a three-year guarantee.
What Driver do I need?
To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.
Which controller can I use?
Our RGB tapes can be used in conjunction with any of our RGBW controllers. View our recommended controllers below.
How do I connect?
Our RGB Tape needs to be hard wired directly into any of our RGBW controllers so you can adjust between the colours. To connect from the Controller's receiver to a power supply simply hard wire into one of our professional driver’s terminals using 2 core cable.
Which profile can I use?
This LED tape can be housed in profiles with a channel width of 12mm or more. View our recommended profiles below.
Please see our FAQ for more help and useful guides, alternatively contact us for technical help.
-Standard Delivery from £3.59 inc VAT (Delivered in 2 -3 days)
-Next Day Delivery from £6.59 inc VAT (Order before 4pm - Next Working Day)
all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.