null

24V Super Bright LED Tape, Very Warm White 2700K, 1930lm p/m, IP20 (5m Reel)

ID: TL032VW1205M

  • 2700K
  • 24V
  • 24 Watts p/m
  • 1930 Lumens p/m
  • IP20
  • Bulk Pricing Available
£39.00
£46.80 (Inc. VAT)
Bulk Pricing:
Buy in bulk and save

Request a bespoke quote

Call us on 0800 088 3300 or send an email to quotations@ultraleds.co.uk — please provide the ID number shown under the product name on the product page.

x
 

24V Super Bright LED Tape, Very Warm White 2700k, 1930lm p/m, IP20 (5m Reel)

The brightest tape in our Professional range, the Super Bright tape series offers super high brightness, high quality illumination ideal for professional long-term installations where performance and durability are key.

Our Professional Super Bright tapes are manufactured using the highest-quality chips producing lower light degradation and offering premium colour rendering. Printed on a thicker 2oz. PCB to help with heat dissipation, these tapes come with a strong 300 LSE 3M tape backing and have 2-core cables pre-soldered at both ends of the reel ready for hard wiring in to the compatible driver.

Ready to Connect tails are also available upon request.

This 5 metre reel can be cut to your desired length at any of the allocated cut points and can be extended if required.

Maximum runs of up to 8 metres can be achieved with this tape before visible voltage drops occur.

All premium non-waterproof tapes are sold with an unprecedented five-year guarantee.

What Driver do I need?

To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

How do I connect?

The 2-core tail can be hard wired into the terminals of the compatible driver. For a plug and play system please request a bespoke quote. You can also solder director to the PCB Pads. Warning: Not suitable for clip on connectors.

Which profile can I use?

This LED tape can be housed in profiles with a channel width of 8mm or more. View our recommended profiles below.

Which controller can I use? (optional)

For single colour tape you can use our Standard Range of controllers.

Please see our FAQ for more help and useful guides, alternatively contact us for technical help.

Specifications:

  • Supplied in 5 metre reels
  • 150mm 2-core cable pre-soldered on each end
  • LED Type: 2835 High Brightness Chip
  • Power Consumption: 24w per metre | 120w per reel
  • Lumens: 1930 p/m
  • Voltage: 24v
  • Tape Width: 10mm
  • Colour Temperature: 2700 Kelvins (warm white)
  • Number of LEDs: 120 per metre | 600 per reel
  • Water Ingress Rating: IP20 (None Waterproof)
  • Cut points: every 5cm
  • Dimmable: Yes
  • guarantee: 5 Year

How Do I Connect?
LED strip lights are supplied with 15cm of live wires pre-soldered on one end. If you are using one of our Standard Range Drivers you can order 1 x U2.1FEM to connect with. If you are using one of our Premium Range Drivers you can wire in directly via terminals located on the unit. (With exception to our waterproof premium drivers, which are fully sealed).

What Driver do I need?
To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

Which profile can I use?
Click here to view our range of aluminium profiles capable of housing this tape.

Note that this tape is high-powered and can be a fire hazard unless correctly mounted to a heat dissipating surface such as aluminium. We strongly advise that you seek advice on mounting this tape to ensure it is safe. Installing too much in a small space without ventilation can cause high temperature build up. Ensure heat can escape using one of our recommended extrusions or another heat convecting surface. Email us for more information.

Please see our FAQ for more help and useful guides.

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

Technical Documentation

Technical Specs