4 Zone RGB Controller & Hand Held Remote 2.4G 18A (6A per channel)

4 Zone RGB Controller & Hand Held Remote 2.4G 10A max

Our RGB colour remote is ideal for any 12v or 24v RGB LED tape. Easy to install and easy to sync up, these controllers are ideal for home use. Everything works via radio frequency.

Endless receivers can be controlled from one handheld remote. Each receiver is placed between a driver and a run of LED tape. Receivers can be grouped into 'zones', of which the remote can run up to four. Zones could easily correspond to rooms in your house, thus you could group all the receivers in your kitchen, bathroom and two bedrooms into four seperate zones and control them all via one remote.

Please note: Controller and receiver is sold seperately, please choose the number of receivers you require above

• Maximum output: 10A maximum 12v or 24V
• 9 Colour Programs
• Change speed and brightness levels
• Maximum range is 30m unobstructed
• Up and down Brightness Button
• Size 85(L)X45(W)X23(H) mm Remote 110mm L x 53mm W x 22mm H
• Endless receivers can be used and joined to this Master remote control system. 
• Place this product between the Power supply and the LED Strips to control the dimming function.
• This can also be used on Iphone Ipad or Android Devices with add on Wifi Addon
• Uses 2 x AAA Batteries

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.