null

420 Lumen 12v 4.8W 3000K Warm White 60x3528 LED Strip IP65 Sleeve (5 Metre reel)

ID: U3528WW60IP

  • 3000K
  • IP65
  • 12V
  • 420lm
Was: £23.83
Now: £9.93
£11.92 (Inc. VAT)

420 Lumen 12v 4.8W 3000K Warm White 60x3528 LED Strip IP65 (5 Metre reel)

Our 420 lumen LED strip light, 12v LED tape is not only flexible, but extremely versatile, meaning it is ideal for use in the home, office or just about anywhere. Perfect for use in kitchen cupboards, ambient lighting pelmets and knock boards.

Whether it’s for illuminating a bedroom, up-lighting a workspace or adding a little colour to your kitchen, this product is suitable for just about any DIY project you have in mind and will give any project a unique, not to mention, eye catching finish.

It’s so easy to install due to its flexible physical size and the 3M adhesive tape on the reverse can be easily concealed. Our range of LED tape has been installed in thousands of locations and we offer one of the most comprehensive ranges of LED strip lighting on the market. 

Specifications:

  • Supplied in 5 metre reels
  • LED Type: 3528 Low Brightness Chip
  • Power Consumption: 4.8w per metre | 24w per reel
  • Lumens: 420 p/m
  • Voltage: 12v
  • Tape Width: 8mm PCB ( 10mm with sleeve )
  • Colour Temperature: 3000 Kelvins (warm white)
  • Number of LEDs: 60 per metre | 300 per reel
  • Water Ingress Rating: IP65 sleeve (Splashproof)
  • Cut points: every 5cm
  • Dimmable: Yes
  • Warranty: 3 Year

How Do I Connect?
LED strip lights are supplied with 15cm of live wires pre-soldered on one end. If you are using one of our Drivers you can order 1 x U2.1FEM to connect with. If you are using one of our Premium Range Drivers you can wire in directly via terminals located on the unit. (With exception to our waterproof premium drivers, which are fully sealed).

How Do I Extend?
You can use our Axis Range of Connectors for our 8mm width tapes here.

What Driver do I need?
To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

Which profile can I use?
Please note that waterproof tapes do not fit inside all of our aluminium profiles. The shallowest profile that can be used is the 17 x 8mm standard profile. Profiles described as 'Extra Deep' will also house these tapes. Please contact us if you are unsure whether a particular combo will work.

Which controller can I use? (optional)
For single colour tape you can use our Standard Range of controllers or the Elencho Wireless Control System.