High CRI >90 750 Lumen 12v 9.4W 2700K Warmer White 78x3528 LED Strip IP20 (5 Metre Reel)


  • 2700K
  • CRI >90
  • IP20
  • 12V
  • 750lm
£54.00 (Inc. VAT)
Bulk Pricing:
Buy in bulk and save

High CRI >90 750 Lumen 12v 9.4W 2700K Warmer White 78x3528 LED Strip IP20 (5 Metre reel)

Our 750 lumen LED strip light, 12v LED tape is not only flexible, but extremely versatile, meaning it is ideal for use in the home, office or just about anywhere. Perfect for use in kitchen cupboards, ambient lighting pelmets and knock boards.

Our high CRI tape is ideal for showcasing colour sensitive objects such as artwork and displays. CRI (colour rendering index) is a measure of a light source's ability to show object colors naturally compared to a incandescent light or daylight which is 100 CRI.

It’s so easy to install due to its flexible physical size and the 3M adhesive tape on the reverse can be easily concealed. Our range of LED tape has been installed in thousands of locations and we offer one of the most comprehensive ranges of LED strip lighting on the market. 


  • Supplied in 5 metre reels
  • LED Type: High output 3528 Medium Brightness Chip
  • Power Consumption: 9.4w per metre | 47w per reel
  • Lumens: 750 p/m
  • Voltage: 12v
  • Tape Width: 8mm
  • Colour Temperature: 2700 Kelvins (warmer white)
  • Number of LEDs: 78 per metre | 390 per reel
  • Water Ingress Rating: IP20 (non waterproof)
  • Cut points: every 5cm
  • Dimmable: Yes
  • Warranty: 3 Year

How Do I Connect?
LED strip lights are supplied with 15cm of live wires pre-soldered on one end. If you are using one of our Standard Range Drivers you can order 1 x U2.1FEM to connect with. If you are using one of our Premium Range Drivers you can wire in directly via terminals located on the unit. (With exception to our waterproof premium drivers, which are fully sealed).

How Do I Extend?
You can use our Axis Range of Connectors for our 8mm width tapes here.

What Driver do I need?
To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

Which profile can I use?
Click here to view our range of aluminium profiles capable of housing this tape.

Which controller can I use? (optional)
For single colour tape you can use our Standard Range of controllers or the Elencho Wireless Control System.

Please see our FAQ for more help and useful guides.