24V Super Bright Cool To Warm Colour Tunable LED Tape, 2700k to 6000k, 18W, IP20 (5m Reel)

ID: TL032CCT1205M

  • 2700K - 6000K
  • 24V
  • 18 Watts p/m
  • Upto 1000 Lumens p/m
  • Bulk Pricing Available
Was: £48.60
Now: £22.00
£26.40 (Inc. VAT)

Request a bespoke quote

Call us on 0800 088 3300 or send an email to — please provide the ID number shown under the product name on the product page.


Super Bright 18w 24v Cool To Warm Colour Tunable LED Tape 2700k to 6000k 5 Metres

The CCT White adjustable tape solves the dilemma of warm white or cool white? This 18w tape allows the user to choose and blend cool white and warm white together to select an exact colour.

The CCT uses 2 x 2835 chips, one 2700k and one 6500k in close proximity to allow for smooth and uniform adjustment.

The CCT adjustable allows you to adjust manually or automatically depending on the time of day or mood. Ideal to fight fatigue in an office environment. High quality grade A chips for a long term reliable install.

Combine with one of our CCT Adjustable control systems. 3 Wire Connection (White / Warm White / Positive) Not suitable with our connection cables.

It’s so easy to install due to its flexible physical size and the 3M adhesive tape on the reverse can be easily concealed. Our range of LED tape has been installed in thousands of locations and we offer one of the most comprehensive ranges of LED strip lighting on the market. 


  • Supplied in 5 metre reels
  • LED Type: 2835 High Brightness Chip
  • Power Consumption: 9w per chip p/m | 18w with both chips on p/m
  • Lumens: 1000 lumens per cool white or warm white chip
  • Voltage: 24v
  • Tape Width: 10mm
  • Colour Temperature: 2700 Kelvins Warm White Chip | 6500 Kelvins Cool White Chip
  • Number of LEDs: 120 per metre | 600 per reel
  • Water Ingress Rating: IP20 (non waterproof)
  • Cut points: every 10cm
  • Dimmable: Yes
  • guarantee: 5 Year

How Do I Connect?
Our CCT Tape needs to be connected directly to our CCT Controller so you can adjust between the colour temperatures. To connect from the Controller's receiver to a power supply you can use one of our Standard Range Drivers. For our Premium Range Drivers you can wire in directly via terminals located on the unit, but you will need some additional cable to bridge the gap, we suggest using our 2 core cable.

What Driver do I need?
To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

For this particular tape you may need to take in to account the wattage of both chips.

How Do I Extend?
You can use our CCT Connection Cables here.

Please see our FAQ for more help and useful guides.

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

Technical Documentation

Technical Specs