Featuring our brand new Splashproof IP65 Dim to Warm LED tape. Perfect for creating dimmable, cosy looking aesthetic. This Dim to Warm LED tape sets itself apart from other tapes by progressively producing a warmer light as it is dimmed from a wall switch through the use of a dimmable driver. This recreates a ‘Halogen’ effect. The brightness ranges from it's lowest at 1800K to a full brightness of 3000K Warm White.
Below is a video showing how this tape can be dimmed when using a dimmable driver and wall dimmer switch.
Common applications include but aren't limited to: architectural decorative lighting, archway, canopy and bridge edge lighting, auditorium walkway lighting, backlighting for letters, channel lighting
26 Watts Per Metre
IP65 Splashproof, for indoor use where light water exposure may occur.
Operating temperature -25°C to +60°C
192 LEDs per metre
Sold in 5 metre reels
PCB width 15mm including Silicone
PCB thickness 4mm including Silicone
Cut points every 8.4cm
500mm Cable Length
LED Chip Spacing 10.4mm
120° Beam Angle
1800K - 2000 Lumens p/m
3000K - 2300 Lumens p/m
What Driver Do I Need to Power This Tape?
1 Metre - Premium Tagra® 30 Watt 24 Volt Dimmable Driver
2 Metres - Premium Tagra® 75 Watt 24 Volt Dimmable Driver
3 Metres - Premium Tagra®150 Watt 24 Volt Dimmable Driver
4 Metres - Premium Tagra®150 Watt 24 Volt Dimmable Driver
5 Metres - Premium Tagra®150 Watt 24 Volt Dimmable Driver
Please note: IP65 Rating is subject to correct installation. The use of a dimmable driver is required for the LED tape to function correctly.
Also available in custom cut lengths, call us on 01625 611 611 to talk about bespoke options.
all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.