Premium High CRI >90 840 Lumen 12v 9.6W 6000K Cool White 120x3528 LED Strip IP20 (5 Metre reel)

ID: TL000CW120CRI90

  • 6000K
  • IP20
  • 12V
  • Dimmable
  • CRI 90+
£37.96 (Inc. VAT)

Sold Out

High CRI >90 840 Lumen 12v 9.6W 6000K Cool White 120 x 3528 Per Metre Led Tape IP20 (5 Metre reel)

A flexible and versatile tape, this 840 Lumen 6000K 12v tape is perfect for domestic and commercial applications.

This tape offers excellent colour rendering making it ideal for displaying colour sensitive objects such as artwork and displays. CRI (colour rendering index) is a measure of a light source's ability to show object colors naturally compared to a incandescent light or daylight which is 100 CRI.

What Makes Our Tape Premium?
Our premium tapes are printed on a thicker 2 oz. PCB to help with heat dissipation and have a high quality chip producing lower light degradation. These tapes come with a strong 300 LSE 3M tape backing and have cables pre-soldered at both ends of the reel. All premium non-waterproof tapes are sold with an unprecedented five year warranty.

Premium tapes are better for long term installations and demanding commercial environments where colour rendering and long lasting brightness is essential. Standard tapes provide a great amount of performance for less cost.


  • Supplied in 5 metre reels
  • LED Type: High output 3528 Medium Brightness Chip
  • Power Consumption: 9.6w per metre | 48w per reel
  • Lumens: 840 p/m
  • Voltage: 12v
  • Tape Width: 8mm
  • Colour Temperature: 6000 Kelvins (cool white)
  • Number of LEDs: 120 per metre | 600 per reel
  • Water Ingress Rating: IP20 (non waterproof)
  • Cut points: every 2.5cm
  • Dimmable: Yes
  • Warranty: 5 Year

How Do I Connect?
LED strip lights are supplied with 15cm of live wires pre-soldered on one end. If you are using one of our Drivers you can order 1 x U2.1FEM to connect with. If you are using one of our Premium Range Drivers you can wire in directly via terminals located on the unit. (With exception to our waterproof premium drivers, which are fully sealed).

How Do I Extend?
You can use our new generation cables for 10mm width tapes here.

What Driver do I need?
To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

Which profile can I use?
Click here to view our range of aluminium profiles capabale of housing this tape.

Which controller can I use? (optional)
For single colour tape you can use our Standard Range of controllers or the Elencho Wireless Control System.

Please see our FAQ for more help and useful guides.

Technical Documentation

Technical Specs