Top View Display LED Neon Flex, 15x26mm, Amber

ID: TL-NEON-AMB/1M

  • 125lm Lumens p/m
  • 4.64 Watts p/m
  • Domed
  • Horizontal bend
  • Splashproof
  • Sold per metre
  • Bulk Pricing Available
  • Dimmable
Was: £14.40
Now: £6.00
£7.20 (Inc. VAT)
Metre(s)

Request a bespoke quote

Call us on 0800 088 3300 or send an email to quotations@ultraleds.co.uk — please provide the ID number shown under the product name on the product page.

x

Top View Display LED Neon Flex, 15x26mm, Amber

LED Neon flex is a flexible light tube designed to produce an ambient linear lighting effect and is perfect for single use display lighting. PVC totally diffused, 'no shadow' no spots and flexible.

It's durable IP65 body allows for installations both in and outdoors where light water exposure may occur.


Neon flex can be used in some instances to replicate traditional neon where fragile glass isn’t suitable. Neon flex can be run in up to 11 metres using a 24v LED driver. The neon flex is supplied in a 50m drum bit we can cut and supply per meter in customised lengths. This domed neon flex is 15mm x 26mm high. Fully dimmable using a dimmable led power supply.

Neon Flex can be dimmed via mains dimming, DALI, DMX or RF controllers.

Please Note: If you order more than a 1 Metre length of Neon Flex you will receive a continuous run as it is taken from a 50m roll.

For a working Neon Flex installation you will need:
• Neon Flex LED 
• 1 x Neon Flex Power Cable
• 1 x Neon Flex Connector Pin
• 1 x Neon Flex End Cap
• 1 x 24 volt power supply

Heat shrink tube is also highly recommended to seal both the endcap and power cable in order to maintain the IP65 waterproof rating.

Specifications:
• Voltage: 24v
• Colour: Amber 585-595nm
• Dimensions:15mm x 26mm
• LED Type: SMD 2835
• Number Of LEDs: 72 Per Metre
• Unit/Cut Length: 8.33cm
• Max Load - 11m
• Power: 4.64W Per Metre
• Lumens: 125lm Per Metre
• Jacket Type: Dome
• IP Rating - IP65 subject to correct installation.
• Maximum bend radius: 4cm
• All our neon flex comes with a 1 year guarantee as standard on indoor installations (1 year guarantee for outdoor installations).

Driver Requirements:
1 metre > 6w
2 metre > 12w
3 metre > 18w
4 metre > 24w
5 metre > 30w
6 metre > 36w
7 metre > 42w
8 metre > 48w
9 metre > 54w
Up to 11 metre – 60w

Drivers and cabling are not covered by the IP65 rating and therefore must be housed indoors in a dry environment. IP65 rating applies to the Neon Flex only.

A 24v LED Transformer is required to power our Neon Flex. 

Please note that we are not able to offer refunds on custom cut lengths of Neon Flex, only for full 50m reels.

Technical Documentation

Technical Specs