Top View Display LED Neon Flex, 15x26mm, Cool White


  • 6000K
  • 57 Lumens p/m
  • 4.2 Watts p/m
  • Domed
  • Horizontal bend
  • Splashproof
  • Sold per metre
  • Bulk Pricing Available
  • Dimmable
£12.00 (Inc. VAT)
Bulk Pricing:
Buy in bulk and save

Request a bespoke quote

Call us on 0800 088 3300 or send an email to — please provide the ID number shown under the product name on the product page.


Useful add ons you may need:

Product Details

Top View Display LED Neon Flex, 15x26mm, Cool White 6000K

LED Neon flex is a flexible light tube designed to produce an ambient linear lighting effect and is perfect for single use display lighting. PVC totally diffused, 'no shadow' no spots and flexible.

It's durable IP65 body allows for installations both in and outdoors where light water exposure may occur.

Neon flex can be used in some instances to replicate traditional neon where fragile glass isn’t suitable. Neon flex can be run in up to 11 metres using a 24v LED driver. The neon flex is supplied in a 50m drum bit we can cut and supply per meter in customised lengths. This domed neon flex is 15mm x 26mm high. Fully dimmable using a dimmable led power supply.

Neon Flex can be dimmed via mains dimming, DALI, DMX or RF controllers.

Please Note: If you order more than a 1 Metre length of Neon Flex you will receive a continuous run as it is taken from a 50m roll.

For a working Neon Flex installation you will need:
• Neon Flex LED 
• 1 x Neon Flex Power Cable
• 1 x Neon Flex Connector Pin
• 1 x Neon Flex End Cap
• 1 x 24 volt power supply

Heat shrink tube is also highly recommended to seal both the endcap and power cable in order to maintain the IP65 waterproof rating.

• Voltage: 24v
• Colour: Cool White 6500K
• Dimensions:15mm x 26mm
• LED Type: SMD 2835
• Number Of LEDs: 96 Per Metre
• Unit/Cut Length: 12.5cm
• Max Load - 11m
• Power: 5.26W Per Metre
• Lumens: 175lm Per Metre
• CRI >80
• Jacket Type: Dome
• IP Rating - IP65
• Maximum bend radius: 4cm
• All our neon flex comes with a 1 year guarantee as standard on indoor and outdoor installations

Driver Requirements:
1 metres > 6w
2 metres > 12w
3 metres > 18w
4 metres > 24w
5 metres > 30w
6 metres > 36w
7 metres > 42w
8 metres > 48w
9 metres > 54w
Up to 11 metres – 80w

A 24v LED Transformer is required to power our Neon Flex.

Drivers and cabling are not covered by the IP65 rating and therefore must be housed indoors in a dry environment. IP65 rating applies to the Neon Flex only.

Please note that we are not able to offer refunds on custom cut lengths of Neon Flex, only for full 50m reels.

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

Technical Documentation

Technical Specs