LTECH 5V-24VDC DMX to SPI LED Pixel Decoder and Controller


  • Virtual Pixel Function
  • 1W Power Consumption
  • DMX512/RDM Input Signal
  • SPI(TTL) Output Signal
£126.00 inc. VAT

LTECH 5V-24VDC DMX to SPI LED Pixel Decoder and Controller

Techncial Specifications:

  • Input voltage: 5~24Vdc
  • Power consumption: 1W
  • Input signal: DMX512/RDM
  • Output signal: SPI(TTL)
  • Self-testing mode: 16
  • Pixel Control quantity: RGB 170 pixels (510CH) | RGBW 128 pixels (512CH
  • Virtual pixel: RGB 1-6 times, Max 1020 pixel | RGBW 1-8 times, Max 1024 pixel
  • Working temp.:-30°C~55°C
  • Dimensions: L175×W44×H30(mm)

The LTECH DMX-SPI-202 DMX Controller converts a universal standard DMX512 signal into SPI(TTL) digital signal and is compatible with most LED Pixel Tapes on the market. The built in DMX digital console can control each channel of LED lights, whether this be ultilising a 0~100% dimming function or defining a variety of pixel chasing and colour changing effects.

Featuring an OLED display makes it easy to select the IC type, RGB sequence pattern and much more with a 16 Built in colour changing modes. The DMX-SPI-202 Can also be used as an independent SPI controller with the used of an LED driver.

An additional function of the DMX-SPI-202 controller is that it can connect to a DMX console to control up to 6 x the LED lights of it's original capacity and a maximum of 1024 pixel can be controlled by a single DMX-SPI-202 controller when installing and using this feature.

Technical Documentation

Technical Specs

User Manual