Designed as a result of years of research, development and experience, the HD95 strip offers the highest 95 + CRI for the closest colour rendering you can achieve to natural light.
With our unprecedented 5 year Pro guarantee available this tape is designed for the highest specifications and installations where reliability and high performance is essential.
The new pro connect system has been added to this range which makes installation easier than ever before. This simple connector allows you to extend the cable length from the tape to any size you require, without having to do any soldering or having to use additional connectors. These connectors are added to both ends which means you can effectively use 2 lengths of LED if cut down.
This product qualifies for the Tagra Premium™ 5 year guarantee:
How Do I Connect?
The Pro Connect system includes 1 metre of cable with bare ends pre-attached, ready to be wired into a terminal style driver. This cable can be swapped out for any other cable which is maximum 0.75mm in wire thickness.
What Driver do I need?
To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.
For the Optiprofile HD95 Pro High tape range the following drivers could be used:
1 metre – ORION-25/24V
2 metre – ORION-36/24V
3 metre – ORION-50/24V
4 metre – ORION-80/24V
5 metre – ORION-100/24V
Which controller can I use? (optional)
For single colour tape you can use our Standard Range of controllers.
all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.