Introducing our new Easy to Use Plug and Play plug and play tape kit, fully equipped with a plug and play driver and a 5 metre reel of Neutral White 4000K LED tape assembled with 60 LEDs per metre, perfect for installing into profile under a Frosted, Semi Clear or transparent diffuser.
Ready to install into profiles or an area of your choosing with it's 3M adhesive backing. IP20 rating, suitable for indoor use in dry environments.
This kit comes complete with 6 connection cables and 6 cable to tape Push Fit adaptors, which means no soldering and different lengths of tape can be cut and connected easily, enabling a whole spectrum of functionality.
Simply clip together and it's ready to go.
Included in our Plug and Play tape kit is:
1 x 60W 12V Ready to Connect Plug and Play driver
1 x 5 Metre Reel of Neutral White LED Tape, 120 LEDs per metre.
6 x Push Fit Connection Adaptors
6 x 1500mm Ready to Connect 8mm Tinned End Cables
This tape can also be made to Dim or turn On/Off with the use of any of our Ready to connect sensors and dimmers listed above in 'Useful add ons you may need'
Please Note: A maximum run of 3.5 metres of LED tape can be achieved from a single driver port. Exceeding this length will cause the driver to reach it’s maximum current capabilities and may cause flickering and safety issues on the installed circuit.
all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.