Our Professional Pro Bright tapes are manufactured using the highest-quality chips producing lower light degradation and offering premium colour rendering. Printed on a thicker 2oz. PCB to help with heat dissipation, these tapes come with a strong 300 LSE 3M tape backing and have 4 core cables pre-soldered at both ends of the reel ready for hard wiring in to the compatible RGB controller.
Plug and Play solutions are also available upon request.
This 5 metre reel can be cut to your desired length at any of the allocated cut points. Please note: A silicone end cap must be glued on to reseal the end once the tape is cut to maintain its IP rating. End cap kits sold separately.
All Pro Bright RGB tapes are sold with a three-year guarantee for peace of mind.
What Driver do I need?
To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.
Which controller can I use?
Our RGB tapes can be used in conjunction with any of our RGB controllers. View our recommended controllers below.
How do I connect?
Our RGB Tape needs to be hard wired directly into any of our RGB controllers so you can adjust between the colours. To connect from the Controller's receiver to a power supply simply hard wire into one of our professional driver’s terminals using 2 core cable.
Which profile can I use?
This LED tape can be housed in profiles with a channel width of 10mm or more. View our recommended profiles below.
Please see our FAQ for more help and useful guides, alternatively contact us for technical help.