null

Premium 960 Lumen 24v 9.6W 6000K Cool White 120x3528 LED Strip IP65 Splashproof (5 Metre reel)

ID: TL024CW120IP65

  • 6000K
  • IP65
  • 24V
  • 960lm
Was: £41.93
Now: £17.47
£20.96 (Inc. VAT)

Premium 960 Lumen 24v 9.6W 6000K Cool White 120x3528 LED Strip IP65 Splashproof (5 Metre reel)

Our 960 lumen LED strip light, 24v LED tape is not only flexible, but extremely versatile, meaning it is ideal for use in the home, office or just about anywhere. 

What Makes Our Tape Premium?
Our Premium offering of tape from Tagra uses superior chips developed with a high color rendering and has a lower decay rate. It also comes with a 5 year warranty. In addition to this our premium tape has the most sticky double sided tape on the back which sticks to almost any surface and reduces the chances of falling off.

Premium tapes are better for long term installations and demanding commercial environments where colour rendering and long lasting brightness is essential.

Standard tapes provide a great amount of performance for less cost.

What Makes Our Tape Premium?
Our premium tapes are printed on a thicker 2 oz. PCB to help with heat dissipation and have a high quality chip producing lower light degradation. These tapes come with a strong 300 LSE 3M tape backing and have cables pre-soldered at both ends of the reel. All premium non-waterproof tapes are sold with an unprecedented five year warranty.

Premium tapes are better for long term installations and demanding commercial environments where colour rendering and long lasting brightness is essential. Standard tapes provide a great amount of performance for less cost.

Specifications:

  • Supplied in 5 metre reels
  • LED Type: 3528 Low Brightness Chip
  • Power Consumption: 9.6w per metre | 48w per reel
  • Lumens: 960 p/m
  • Voltage: 24v
  • Tape Width: 10mm + 2mm Silicone
  • Colour Temperature: 6000 Kelvins (cool white)
  • Number of LEDs: 120 per metre | 600 per reel
  • Water Ingress Rating: IP65 (splashproof)
  • Cut points: every 5cm
  • Dimmable: Yes
  • Warranty: 3 Year

How Do I Connect?
LED strip lights are supplied with 15cm of live wires pre-soldered on one end. If you are using one of our Standard Range Drivers you can order 1 x U2.1FEM to connect with. If you are using one of our Premium Range Drivers you can wire in directly via terminals located on the unit. (With exception to our waterproof premium drivers, which are fully sealed).

How Do I Extend?
You can use our IP65 connector block for our single colour tapes here.

What Driver do I need?
To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

Which profile can I use?
Please note that waterproof tapes do not fit inside all of our aluminium profiles. The shallowest profile that can be used is the 17 x 8mm standard profile. Profiles described as 'Extra Deep' will also house these tapes. Please contact us if you are unsure whether a particular combo will work.

Which controller can I use? (optional)
For single colour tape you can use our Standard Range of controllers or the Elencho Wireless Control System.
Elencho

Please see our FAQ for more help and useful guides.

Technical Documentation

Technical Specs