24V Pro Bright Bendable LED Tape, RGB Colour Changing, 14.4w p/m, IP20 (5m Reel)

ID: TL026RGB60BEND5M

  • RGB Colour Changing
  • 24V
  • 14.4 Watts p/m
  • Upto 820 Lumens p/m
  • Bulk Pricing Available
£44.00
£52.80 (Inc. VAT)
Bulk Pricing:
Buy in bulk and save

Request a bespoke quote

Call us on 0800 088 3300 or send an email to quotations@ultraleds.co.uk — please provide the ID number shown under the product name on the product page.

x

24V Pro Bright Bendable LED Tape, RGB Colour changing, 14.4w p/m, IP20 (5m Reel)

The Pro Bright RGB tape series offers a high brightness, high quality light output ideal for professional long-term installations where performance and durability is key. The 'Z' style PCB allows the user to bend the tape to corners up to 90º, reducing the need to cut the tape to accommodate corners.

Our Professional Pro Bright tapes are manufactured using the highest-quality chips producing lower light degradation and offering premium colour rendering. Printed on a thicker 2oz. PCB to help with heat dissipation, these tapes come with a strong 300 LSE 3M tape backing and have 4-core cables pre-soldered at both ends of the reel ready for hard wiring in to the compatible RGB controller.

Plug and Play solutions are also available upon request.

This 5 metre reel can be cut to your desired length at any of the allocated cut points.

All Pro Bright RGB tapes are sold with a three-year guarantee for peace of mind.

What Driver do I need?

To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

Which controller can I use?

Our RGB tapes can be used in conjunction with any of our RGB controllers. View our recommended controllers below.

How do I connect?

Our RGB Tape needs to be hard wired directly into any of our RGB controllers so you can adjust between the colours. To connect from the Controller's receiver to a power supply simply hard wire into one of our professional driver’s terminals using 2 core cable.

Which profile can I use?

This LED tape can be housed in profiles with a channel width of 10mm or more. View our recommended profiles below.

Please see our FAQ for more help and useful guides, alternatively contact us for technical help.

Specifications:

  • Supplied in 5 metre reels
  • 2x 500mm 4 core tails on each end
  • LED Type: 5050 High Brightness Chip
  • Power Consumption: 14.4w per metre | 72w per reel
  • Lumens: >900 p/m - 1080 lumens will all colours lit (white)
  • Voltage: 24v
  • Tape Width: 12mm
  • Colour: Red, Green, Blue
  • Number of LEDs: 60 per metre | 300 per reel
  • Water Ingress Rating: IP20 (non waterproof)
  • Cut points: every 10cm
  • Dimmable: Yes
  • guarantee: 5 Year

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

Technical Documentation

Technical Specs