Premium Bendable LED Tape by Tagra®, Warmer White, 12w p/m (5 Metre Reel)


  • Bendable
  • 2700K
  • IP20
  • 12V
Was: £35.94
Now: £14.98
£17.98 (Inc. VAT)

Premium Bendable PCB 1320 Lumens 12V 12W Warmer White 2700K 60x2835 LED Strip (5 Metre Reel)

Our 1320 lumen LED strip light, 12v LED tape is not only flexible, but extremely versatile, meaning it is ideal for use in the home, office or just about anywhere. Perfect for use in kitchen cupboards, ambient lighting pelmets and knock boards.

This LED Strip Tape can be bent at angles to allow installations around corners without having to cut or use connectors. Ideal for time saving projects and bending around edges. This 8mm single colour tape is of the highest distinction with a colour rendering that distinguishing it from the competition. With a fail rate of less that 0.02%, this product will perform exceptionally well in demanding commercial environments.

It’s so easy to install due to its flexible physical size and the 3M adhesive tape on the reverse can be easily concealed. Our range of LED tape has been installed in thousands of locations and we offer one of the most comprehensive ranges of LED strip lighting on the market.

Please note: Due to the zigzag PCB, voltage drop will occur after around 3.5m. If you plan to run lengths beyond this it would be best to power the tape from both ends.


  • Supplied in 5 metre reels
  • LED Type: 2835 High Brightness Chip
  • Power Consumption: 12w per metre | 60w per reel
  • Lumens: 1320 - 1440 p/m
  • Voltage: 12v
  • Tape Width: 8mm ZigZag PCB
  • Colour Temperature: 2700 Kelvins (warmer white)
  • Number of LEDs: 60 per metre | 300 per reel
  • Water Ingress Rating: IP20 (non waterproof)
  • Cut points: every 5cm
  • Dimmable: Yes
  • Warranty: 5 Year

How Do I Connect?
LED strip lights are supplied with 15cm of live wires pre-soldered on one end. If you are using one of our Standard Range Drivers you can order 1 x U2.1FEM to connect with. If you are using one of our Premium Range Drivers you can wire in directly via terminals located on the unit. (With exception to our waterproof premium drivers, which are fully sealed).

What Driver do I need?
To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

How Do I Extend?
You can use our Axis Range of Connectors for our 8mm width tapes here.

Please see our FAQ for more help and useful guides.

Technical Documentation

Technical Specs

Technical Specs