null

Bright Plus 9w 24v LED Tape 3000k Warm White 5 Metres TL016WW120

ID: TL016WW120

  • 3000K
  • 24V
  • 9 Watts p/m
  • 810 Lumens p/m
  • IP20
£34.00
£40.80 (Inc. VAT)
Bulk Pricing:
Buy in bulk and save

Bright Plus 9w 24v LED Tape 3000k Warm White 5 Metres

New Micro LED tape at just 4mm wide. Great for all the tight installation areas and ideal for use with our smallest Micro Aluminium Profile or edge lighting acrylic.

Available in colour temperatures ranging from 2000k to 6000k and with a 95 CRI rating for the most accurare colour rendering.

Dimmable via DALI, DMX, ELV, TRIAC and 0-10V methods.

What Makes Our Tape Premium?
Our premium tapes are printed on a thicker 2 oz. PCB to help with heat dissipation and have a high quality chip producing lower light degradation. These tapes come with a strong 300 LSE 3M tape backing and have cables pre-soldered at both ends of the reel. All premium non-waterproof tapes are sold with an unprecedented five year guarantee.

Premium tapes are better for long term installations and demanding commercial environments where colour rendering and long lasting brightness is essential. Standard tapes provide a great amount of performance for less cost.

Specifications:

  • Supplied in 5 metre reels
  • LED Type: 2216 Chip
  • Power Consumption: 9w per metre | 45w per reel
  • Lumens: 710 p/m
  • Voltage: 24v
  • Tape Width: 4mm micro width
  • Colour Temperature: 3000 Kelvins (warm white)
  • Number of LEDs: 120 per metre | 600 per reel
  • Water Ingress Rating: IP20 (non waterproof)
  • Cut points: every 5cm
  • Dimmable: Yes
  • guarantee: 5 Year

How Do I Connect?
LED strip lights are supplied with 15cm of live wires pre-soldered on one end. If you are using one of our Standard Range Drivers you can order 1 x U2.1FEM to connect with. If you are using one of our Premium Range Drivers you can wire in directly via terminals located on the unit. (With exception to our waterproof premium drivers, which are fully sealed).

What Driver do I need?
To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

For the TL016 tape range the following drivers could be used:

  • 1 metre – ORION-15/24V
  • 2 metre – ORION-25/24V
  • 3 metre – ORION-36/24V
  • 4 metre – ORION-50/24V
  • 5 metre – ORION-50/24V

Which profile can I use?
Click here to view our range of aluminium profiles capable of housing this tape.

Which controller can I use? (optional)
For single colour tape you can use our Standard Range of controllers or the Elencho Wireless Control System.
Elencho

Please see our FAQ for more help and useful guides.

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

Technical Documentation

Technical Specs