null

24V Professional Ultra Violet LED Tape, 11w, IP20 (5m Reel)

ID: TL032UV120

  • 24V
  • 11 Watts p/m
  • Bulk Pricing Available
Was: £166.87
Now: £69.53
£83.44 (Inc. VAT)

Request a bespoke quote

Call us on 0800 088 3300 or send an email to quotations@ultraleds.co.uk — please provide the ID number shown under the product name on the product page.

x

Professional Tagra 24V Ultra Violet UV Blacklight 11w 120 LEDs (5 Metre Reel)

This professional UV black light LED Strip light is used for many purposes including digital print applications and reprography.
The UV light exposes certain colour wavelengths making them appear fluorescent.

What Makes Our Tape Premium?
Our premium tapes are printed on a thicker 2 oz. PCB to help with heat dissipation and have a high quality chip producing lower light degradation. These tapes come with a strong 300 LSE 3M tape backing and have cables pre-soldered at both ends of the reel. All premium non-waterproof tapes are sold with an unprecendented five year guarantee.

Premium tapes are better for long term installations and demanding commercial environments where colour rendering and long lasting brightness is essential. Standard tapes provide a great amount of performance for less cost.

Specifications:

  • Supplied in 5 metre reels
  • LED Type: 2835 High Brightness Chip
  • Power Consumption: 11w per metre | 55w per reel
  • Lumens: 65 p/m
  • Voltage: 24v
  • Tape Width: 10mm
  • Colour Temperature: 395nm ~ 400nm UV
  • Number of LEDs: 120 per metre | 600 per reel
  • Water Ingress Rating: IP20 (non waterproof)
  • Cut points: every 2.5cm
  • Dimmable: Yes - DALI, DMX, Triac, ELV, 0-10v
  • guarantee: 5 Year

How Do I Connect?
LED strip lights are supplied with 15cm of live wires pre-soldered on one end. If you are using one of our Standard Range Drivers you can order 1 x U2.1FEM to connect with. If you are using one of our Premium Range Drivers you can wire in directly via terminals located on the unit. (With exception to our waterproof premium drivers, which are fully sealed).

How Do I Extend?
You can use our new generation cables for 10mm width tapes here.

Which profile can I use?
Click here to view our range of aluminium profiles capable of housing this tape.

What Driver do I need?
To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

1 Metre - >12W
2 Metres - >25W
3 Metres - >37W
4 Metres - >49W
5 Metres - > 61W

Please see our FAQ for more help and useful guides.

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

Technical Documentation

Technical Specs