null

Syndeo Plug and Play 12V 60 LEDs 4.8w p/m LED Tape, Cool White 6000K, IP20 (5m Reel)

ID: UL2835CW60

  • 6000K
  • 12V
  • 5 Watts p/m
  • 480 Lumens p/m
  • Plug and Play
  • 8mm Tape Width
£14.00
£16.80 (Inc. VAT)
Bulk Pricing:
Buy in bulk and save

Useful add ons you may need:

Product Details

Syndeo Plug and Play 12V 60 LEDs 4.8w p/m LED Tape, Cool White 6000K, IP20 (5m Reel)

The Syndeo 5 metre reels of LED Strip Tape come with a 500mm tail, Plug and Play Syndeo connector and self-adhesive backing which makes installation quick and hassle free. There is no complicated wiring involved, simply plug in and go.

This robust tape can be cut to any desired length at any of the allocated cut points, and can be extended if required. The tail on each end ensures you can use two runs of our tape with the compatible Syndeo multiport driver, minimising waste. If there is a requirement for the strip tape to be cut into several sections we also offer additional plug & play snap connectors to accompany this.

Maximum runs of up to 5 metres can be achieved with this tape before visible voltage drops occur.

Syndeo LED Strips use a more efficient 2835 chip, producing more lumens per watt than old style legacy strip lights currently offered in the mass market today.

12V strip tape works from a 240v mains circuit when being powered by a compatible transformer. Alternatively, the strip units can be wired to a dedicated 12V DC circuit without the need for a transformer. To guarantee the highest efficiency, we advise that you change your existing transformers to LED Drivers guaranteeing compatibility. Please see our quick driver guide below:

What Driver do I need?

We have many compatible Syndeo Plug and Play drivers available in various wattages. To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

For this tape range you will require a driver which is above the below figures.

  • 1 metre – More than 6w
  • 2 metre – More than 11w
  • 3 metre – More than 16w
  • 4 metre – More than 22w
  • 5 metre – More than 27w

Which profile can I use?

This LED tape can be housed in profiles with a channel width of 8mm or more. View our recommended profiles below.

Which controller can I use? (optional)

For single colour tape you can use our Standard Range of controllers.

How do I connect?

Simply plug the Syndeo connector into one of the ports of the Syndeo Plug and Play multiport driver. Alternatively, you can cut the Syndeo plug off the end of the 2-core wire with scissors and hard wire it in to one of our professional drivers.

Please see our FAQ for more help and useful guides, alternatively contact us for technical help.

-Standard Delivery from £3.59 inc VAT (Delivered in 2 -3 days)
-Next Day Delivery from £6.59 inc VAT (Order before 4pm - Next Working Day)

Dimming Compatibility

  • Compatible with dimmers using standard control protocols including DMX, Dali, 0-10V, PWM.
  • Compatible with smarthome dimmers including those from Lutron, Loxone, Rayco, Control 4, Lightwave, Wizz, Casambi, Crestron.

Specifications:

  • Supplied in 5 metre reels
  • Includes a 500mm Syndeo connector cable compatible with the Syndeo Plug and Play multiport driver
  • LED Type: 2835 Chip
  • Power Consumption: 4.8w per metre | 24w per reel
  • Lumens: 480 p/m
  • Voltage: 12v
  • Tape Width: 8mm
  • Colour Temperature: 6000 Kelvins (cool white)
  • Number of LEDs: 60 per metre | 300 per reel
  • CRI: >90
  • Water Ingress Rating: IP20 (non waterproof)
  • Cut points: every 5cm
  • Ready Connect amp rating: 5Amp
  • Dimmable: Yes (DALI,DMX,ELV,TRIAC,0-10V)
  • Guarantee: 3 Years

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

Technical Documentation

Technical Specs

syndeoclickthrough-mobile.jpg