null

Syndeo Plug and Play 24V 60 LEDs 4.8w p/m LED Tape, Cool White 6000K, IP20 (5m Reel)

ID: UL2835CW60/24V

  • 6000K
  • 24V
  • 5 Watts p/m
  • 480 Lumens p/m
  • Plug and Play
  • 8mm Tape Width
£14.00
£16.80 (Inc. VAT)

Sold Out

Bulk Pricing:
Buy in bulk and save

Useful add ons you may need:

Product Details

Syndeo Plug and Play 24V 60 LEDs 4.8w p/m LED Tape, Cool White 6000K, IP20 (5m Reel)

24V Syndeo Plug and Play 5 metre reels of LED Strip Tape come with a 24V Green 500mm Syndeo connector and self-adhesive backing which makes installation quick and hassle free. There is no complicated wiring involved, simply plug in to the 24V Syndeo Plug and Play Driver and go.

This robust tape can be cut to any desired length at any of the allocated cut points, and can be extended if required. The Green 24V Syndeo Plug and Play tail on each end ensures you can use two runs of our tape with our 24V Syndeo Plug and Play drivers, minimising waste. If there is a requirement for the strip tape to be cut into several sections we also offer additional plug & play snap connectors to accompany this.

*Please Note: Compatible with the 24V Syndeo Plug and Play Multiport Driver and Components only and not the Ready to Connect Multiport Driver or Components.

Maximum runs of up to 8 metres can be achieved with this tape before visible voltage drops occur.

Syndeo Plug and Play 24V LED Strips use a more efficient 2835 chip, producing more lumens per watt than old style legacy strip lights currently offered in the mass market today.

24V strip tape works from a 240v mains circuit when being powered by a compatible transformer. Alternatively, the strip units can be wired to a dedicated 24V DC circuit without the need for a transformer.

To guarantee the highest efficiency, we advise that you change your existing transformers to LED Drivers guaranteeing compatibility. Please see our quick driver guide below:

What Driver do I need?

To work out the wattage of the driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

For this tape range you will require a driver which is above the below figures.

  • 1 metre – More than 6w
  • 2 metre – More than 11w
  • 3 metre – More than 16w
  • 4 metre – More than 22w
  • 5 metre – More than 27w

Which profile can I use?

This LED tape can be housed in profiles with a channel width of 8mm or more. View our recommended profiles below.

Which controller can I use? (optional)

For single colour tape you can use our Standard Range of controllers.

How do I connect?

Simply plug the Green Syndeo Plug and Play connector into the compatible 24V Syndeo Driver.

Please see our FAQ for more help and useful guides, alternatively contact us for technical help.

-Standard Delivery from £3.59 inc VAT (Delivered in 2 -3 days)
-Next Day Delivery from £6.59 inc VAT (Order before 4pm - Next Working Day)

Dimming Compatibility

  • Compatible with dimmers using standard control protocols including DMX, Dali, 0-10V, PWM.
  • Compatible with smarthome dimmers including those from Lutron, Loxone, Rayco, Control 4, Lightwave, Wizz, Casambi, Crestron.

Specifications:

  • Supplied in 5 metre reels
  • Includes a 500mm 24V Green Syndeo Plug and Play Connector cable at each end compatible with the Syndeo 24V Plug and Play multiport driver
  • LED Type: 2835 Chip
  • Power Consumption: 4.8w per metre | 24w per reel
  • Lumens: 480 p/m
  • Voltage: 24v
  • Tape Width: 8mm
  • Colour Temperature: 6000 Kelvins (cool white)
  • Number of LEDs: 60 per metre | 300 per reel
  • CRI: >90
  • Water Ingress Rating: IP20 (non waterproof)
  • Cut points: every 10cm
  • Dimmable: Yes (DALI,DMX,ELV,TRIAC,0-10V)
  • Guarantee: 3 Years

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

Technical Documentation

 Technical Specs