Maximum runs of up to 5 metres can be achieved with this tape before visible voltage drops occur.
The robust tape can be cut to any desired length at any of the allocated cut points.
Please note: A silicone end cap must be glued on to reseal the end once the tape is cut to maintain its IP rating. End cap kits sold separately.
Syndeo LED Strips use a more efficient 2835 chip, producing more lumens per watt than old style legacy strip lights currently offered in the mass market today.
12V strip tape works from a 240v mains circuit when being powered by a compatible transformer. Alternatively, the strip units can be wired to a dedicated 12V DC circuit without the need for a transformer.
To guarantee the highest efficiency, we advise that you change your existing transformers to LED Drivers guaranteeing compatibility. Please see our quick driver guide below:
What Driver do I need?
We have many compatible Syndeo Plug and Play drivers available in various wattages. To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.
For this tape range you will require a driver which is above the below figures.
Which profile can I use?
This LED tape can be housed in profiles with a channel width of 10mm or more. View our recommended profiles below.
Which controller can I use? (optional)
For single colour tape you can use our Standard Range of controllers.
Please see our FAQ for more help and useful guides, alternatively contact us for technical help.
-Standard Delivery from £3.59 inc VAT (Delivered in 2 -3 days)
-Next Day Delivery from £6.59 inc VAT (Order before 4pm - Next Working Day)
all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.