null

12V Easy to Use Bright Plus LED Tape, Warm White 3000K, 120 LEDs p/m, IP20 (5m Reel)

ID: UL2835WW120

  • 3000K
  • 12V
  • 10 Watts p/m
  • 960 Lumens p/m
  • Plug and Play
  • Bulk Pricing Available
£22.00
£26.40 (Inc. VAT)
Bulk Pricing:
Buy in bulk and save

Request a bespoke quote

Call us on 0800 088 3300 or send an email to quotations@ultraleds.co.uk — please provide the ID number shown under the product name on the product page.

x

Useful add ons you may need:

Product Details

12V Easy to Use Bright Plus LED Tape, Warm White 3000K, 120 LEDs p/m, IP20 (5m Reel)

The Easy to Use 5 metre reels of LED Strip tapes come with a pre-attached DC jack and self-adhesive backing which makes installation quick and hassle free. There is no complicated wiring involved, simply plug in to the compatible driver and go.

This robust tape can be cut to any desired length at any of the allocated cut points, and can be extended if required. The tail on each end ensures you can use two runs of our tape with the multiport driver, minimising waste. If there is a requirement for the strip tape to be cut into several sections we also offer additional plug & play snap connectors to accompany this.

Maximum runs of up to 5 metres can be achieved with this tape before visible voltage drops occur.

Bright Plus LED Strips use a more efficient 2835 chip, producing more lumens per watt than old style legacy strip lights currently offered in the mass market today.

12V strip tape works from a 240v mains circuit when being powered by a compatible transformer. Alternatively, the strip units can be wired to a dedicated 12V DC circuit without the need for a transformer. To guarantee the highest efficiency, we advise that you change your existing transformers to LED Drivers guaranteeing compatibility. Please see our quick driver guide below:

What Driver do I need?

We have many easy to use compatible drivers available in various wattages. To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

For this tape range you will require a driver which is above the below figures.

  • 1 metre – More than 11w
    2 metre – More than 22w
    3 metre – More than 32w
    4 metre – More than 43w
    5 metre – More than 53w

Which profile can I use?

This LED tape can be housed in profiles with a channel width of 8mm or more. View our recommended profiles below.

Which controller can I use? (optional)

For single colour tape you can use our Standard Range of controllers.

How do I connect?

Simply plug the Easy to Use plug into one of the ports of the Syndeo multiport driver. Alternatively, you can cut the Easy to Use plug off the end of the 2-core wire with scissors and hard wire it in to one of our professional drivers.

Please see our FAQ for more help and useful guides, alternatively contact us for technical help.

Specifications:

  • Supplied in 5 metre reels
  • Includes Female DC Jack Connector Plug
  • LED Type: 2835 Chip
  • Power Consumption: 9.6w per metre | 48w per reel
  • Lumens: 960 p/m
  • Voltage: 12v
  • Tape Width: 8mm
  • Colour Temperature: 3000 Kelvins (warm white)
  • Number of LEDs: 120 per metre | 600 per reel
  • CRI: >90
  • Water Ingress Rating: IP20 (non waterproof)
  • Cut points: every 2.5cm
  • Ready Connect amp rating: 5Amp
  • Dimmable: Yes (DALI,DMX,ELV,TRIAC,0-10V)
  • guarantee: 3 Year

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

Technical Documentation

Technical Specs