Introducing our new range of Infrared sensor switches, available in 5 different variations. High quality sensors allow LED lights to be switched off when the infrared beam is blocked i.e when cupboard/doors are closed.
These sensors sit between the LED Transformer and the LED Strip Light.
The Recessed all in one SR-1 is a standard all in one unit which combines the power and sensors, an ideal solution if space isn't an issue. Made for recessing, full specification sheets are provided with each purchase with installation instructions.
With the use of a Molex adaptor, connect directy to the Ready to Connect Driver's main port to control all your lights or Connect a sensor to each Ready to Connectport to control individual sections.
• DC 12v/24v
• Max Switching Capacity: 60w
• Cable Length: 2 x 1500mm
• IP20 Non Waterproof
• Sensor Distance: 5-10mm
• Guarantee: 2 Years
Note: This sensor requires a 2cm circumference around it to function properly
For Full Specifications - See PDF Document below
all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.