Syndeo Plug and Play Delayed Timer PIR Motion Sensor - 15 Minute Delay


  • Upto 3 Metre Detection Distance
  • Recessable or Surface Mountable
  • 12mm Diameter
  • Plug and Play
  • Capable of 12V and 24V
£15.26 inc. VAT

Syndeo Plug and Play Delayed Timer PIR Motion Sensor - 15 min delay

Technical Specifications:

  • Voltage: 12V and 24V
  • Standby Power: < 0.3W
  • Sensor Range: 0-3000mm
  • Material: Plastic
  • Colour: Silver
  • Cable Length: 2000mm
  • IP Rating: IP20
  • Installation: Recessed (12mm Cut Out) or Surface Mounted (Mouting Bracket Included)
  • Dimensions (mm): L 40.3 x W 11.8
  • Guarantee: 3 Years
  • Certification: RoHS, CE

Lighting Control Made Simple

This PIR motion sensor is perfect for long range motion detection, with a detection angle of 90º it works by either turning the lights on or off when motion is detected from a distance of upto 3000mm.

When triggered, the lights will remain on for 15 minuites whilst no motion is detected.

Can with be recessed into a 12mm diameter hole with a depth of 60mm or surface mounted using the mounting bracket included in the package. 

Designed to plug directly into the master control port of a 12V or 24V Plug and Play Syndeo Driver to control an entire lighting system. Comes equipped with a detachable cable for ease of install, fully plug and play and no need for soldering, saving you time and cost on your project.

*Please Note: Compatible with Syndeo Drivers and Components only and not Ready to Connect Components or Drivers. 

Mounting bracket included

All products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

-Next Day Delivery from £10.74 inc VAT (Order before 4pm - Next Working Day)

Technical Documentation

Technical Specs