24V Easy to Use Eco Bright LED Tape, Flame White 2000K, 60 LEDs p/m, IP65 (5m Reel)

The IP rated Easy to Use 5 metre reels of LED Strip tapes come with a pre-attached DC jack and self-adhesive backing which makes installation quick and hassle free. There is no complicated wiring involved, simply plug in to the compatible driver and go.

Maximum runs of up to 8 metres can be achieved with this tape before visible voltage drops occur.

The robust tape can be cut to any desired length at any of the allocated cut points.

Please note: A silicone end cap must be glued on to reseal the end once the tape is cut to maintain its IP rating. End cap kits sold separately.

Eco Bright LED Strips use a more efficient 2835 chip, producing more lumens per watt than old style legacy strip lights currently offered in the mass market today.

24V strip tape works from a 240v mains circuit when being powered by a compatible transformer. Alternatively, the strip units can be wired to a dedicated 24V DC circuit without the need for a transformer.

To guarantee the highest efficiency, we advise that you change your existing transformers to LED Drivers guaranteeing compatibility. Please see our quick driver guide below:

What Driver do I need?

We have many easy to use compatible drivers available in various wattages. To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

For this tape range you will require a driver which is above the below figures.

• 1 metre – More than 6w
• 2 metre – More than 11w
• 3 metre – More than 16w
• 4 metre – More than 22w
• 5 metre – More than 27w

Which profile can I use?

This LED tape can be housed in profiles with a channel width of 10mm or more. View our recommended profiles below.

Which controller can I use? (optional)

For single colour tape you can use our Standard Range of controllers.

How do I connect?

Simply plug the DC jack into the compatible Ready to Connect Orion Driver

Please see our FAQ for more help and useful guides, alternatively contact us for technical help.

Specifications:

• Supplied in 5 metre reels
• Includes 500mm Plug and Play Female DC Jack
• LED Type: 2835 Chip
• Power Consumption: 4.8w per metre | 24w per reel
• Lumens: 480 p/m
• Voltage: 24v
• Tape Width: 8mm + 2mm Silicone
• Colour Temperature: 2000K Flame White
• Number of LEDs: 60 per metre | 300 per reel
• CRI: >80
• Water Ingress Rating: IP65 (Splashproof)
• Cut points: every 10cm
• Ready Connect amp rating: 5Amp
• Dimmable: Yes (DALI,DMX,ELV,TRIAC,0-10V)
• guarantee: 3 Year

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.