null

Super Bright Double-Width LED Tape by Tagra®, Warm White, 36w p/m (5 Metre Reel)

ID: TL048VW1205M

  • 2700K
  • CRI 80
  • Dimmable
  • 3320lm
  • 12V
Was: £66.00
Now: £33.00
£39.60 (Inc. VAT)

Premium 3360 Lumens 12V 36W Warm White 2700K 120x5630 LED Strip (5 Metre Reel)

Our 3360 lumen LED strip light, 12v LED tape is not only flexible, but extremely versatile, meaning it is ideal for use in the home, office or just about anywhere. Perfect for use in kitchen cupboards, ambient lighting pelmets and knock boards.

This extreme brightness single colour tape is of the highest distinction with a colour rendering that distinguishing it from the competition. With a fail rate of less that 0.02%, this product will perform exceptionally well in demanding commercial environments.

It’s so easy to install due to its flexible physical size and the 3M adhesive tape on the reverse can be easily concealed. Our range of LED tape has been installed in thousands of locations and we offer one of the most comprehensive ranges of LED strip lighting on the market. 

Specifications:

  • Supplied in 5 metre reels
  • LED Type: 5630 Very High Brightness Chip
  • Power Consumption: 36w per metre | 180w per reel
  • Lumens: 3360 p/m
  • Voltage: 12v
  • Tape Width: 20mm
  • Colour Temperature: 2700 Kelvins (warm white)
  • Number of LEDs: 120 per metre | 500 per reel
  • Water Ingress Rating: IP20 (non waterproof)
  • Cut points: every 5cm
  • Dimmable: Yes
  • Warranty: 3 Year

How Do I Connect?
LED strip lights are supplied with 15cm of live wires pre-soldered on one end. If you are using one of our Drivers you can order 1 x U2.1FEM to connect with. If you are using one of our Premium Range Drivers you can wire in directly via terminals located on the unit. (With exception to our waterproof premium drivers, which are fully sealed).

What Driver do I need?
To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

Which profile can I use?
Click here to view our range of aluminium profiles capable of housing this tape.

Which controller can I use? (optional)
For single colour tape you can use our Standard Range of controllers or the Elencho Wireless Control System.
Elencho

Note that this tape is high-powered and can be a fire hazard unless correctly mounted to a heat dissipating surface such as aluminium. We strongly advise that you seek advice on mounting this tape to ensure it is safe. Installing too much in a small space without ventilation can cause high temperature build up. Ensure heat can escape using one of our recommended extrusions or another heat convecting surface. Email us for more information.

Please see our FAQ for more help and useful guides.

Technical Documentation

Technical Specs