Cut to Size by Tagra | Pro COB LED Strip Light | 840 LEDs/m | 24V | IP20 | 18.5W/m | RGB+W | Custom

Cut to Size LED Strip Light

Our Cut to Size LED Strip Light service is the perfect solution to saving you valuable labour time. Our strip lights are cut to your desired metre length and professionally soldered with a 2 metre cable. The length can be further refined by cutting along the designated cut points when received.

Soldering Service Included

A professional soldering service is included in the price meaning your selected length will come with a pre-attached 2 Metre Tagra Pro Low Voltage Cable and a protective heatshrink wrapping.

Available in RGB+2700K, RGB+3000K, RGB+4000K, RGB+6500K, with 840 LEDs per metre producing a spot free light, this LED strip light is perfect for a variety of installations where colour changing lighting is required. An additional white LED chip allows you to produce a dedicated white light, perfect for a variety of installations. The 12mm strip light width makes it suitable for a range of LED profiles and can be used to achieve a non-spotting finish in all our profiles.

Featuring 18.5W per metre power consumption and able to achieve up to 1060 lumens per metre, this a high-quality colour changing LED strip light is ideal for adding colour and vibrance to your space. Rated IP20 for indoor use only.

Important:

• Cut to Size LED Strip Light is non-refundable due to the custom nature of the product.
• Rated IP20 for indoor use only.
• This strip light cannot be wired directly into the mains. A 24V LED Driver is required.
• This strip light has a maximum linear run of 5 metres.
• An LED Controller is required to fully control this LED strip lights capabilities.

Delivery:

The next working day delivery cut off is 12pm. This differs from the standard 4pm delivery cut off for the majority of the products on the website, due to the custom nature of the product.