Essential Mini LED Neon Flex , 10x15mm, Horizontal Bend, Green, 50 Metre Reel


  • 268 Lumens p/m
  • 5.38 Watts p/m
  • Domed
  • Horizontal bend
  • Splashproof
  • Bulk Pricing Available
  • Dimmable
£510.00 inc. VAT

Useful add ons you may need:

Product Details

Essential Mini LED Neon Flex , 10x15mm, Horizontal Bend, Green, 50 Metre Reel


Now available in a 50 metre reel, LED Neon Flex Mini is a new compact version of our Neon Flex tube lighting, at only 15 x 10mm its small size and light weight it is ideal for slimline single use display applications both indoors and outdoors.

As the name suggests, it is highly flexible and can be bent to a minimum radius of 2 cm, and can be cut easily to your desired lengths. Maximum linear run at any time before voltage drop occurs is 10 metres.

Neon Flex can be dimmed via mains dimming, DALIDMX or RF controllers.

Please Note: We are not able to offer refunds on cut lengths of Neon Flex Mini, only for full 50m reels. Our 50 metre reels of Neon Flex are supplied in a continuous 50 metre length.

For a working Neon Flex Mini installation you will need:

• Neon Flex Mini LED 
• 1 x Neon Flex Mini Power Cable
• 1 x Neon Flex Mini Connector Pin
• 1 x Neon Flex Mini End Cap
• 1 x 24 volt power supply

Heat shrink tube is also highly recommended to seal both the endcap and power cable in order to maintain the IP65 Splashproof rating.

All our neon flex comes with a 1 year guarantee as standard on indoor and outdoor installations.

-Next Day Delivery from £10.74 inc VAT (Order before 4pm - Next Working Day)

Dimming Compatibility

  • Compatible with dimmers using standard control protocols including DMX, Dali, 0-10V, PWM.
  • Compatible with smarthome dimmers including those from Lutron, Loxone, Rayco, Control 4, Lightwave, Wizz, Casambi, Crestron.


  • Voltage - 24v
  • Dimensions - 15mm x 10mm
  • LED Type - SMD2835 in Epistar Chip
  • Number Of LEDs - 72 Per Metre
  • Cut Points - Every 12.5cm
  • Max Load - 10m
  • LED Distance - 8.33mm
  • Power - 5.38W Per Metre
  • Lumens - 268 Per Metre
  • Jacket Type: Domed
  • IP Rating - IP65 subject to correct installation.
  • Max Bend Radius - 2cm

Driver Requirements:
1 metre > 6w
2 metre > 12w
3 metre > 18w
4 metre > 24w
5 metre > 30w
6 metre > 36w
7 metre > 42w
8 metre > 48w
9 metre > 54w
Up to 10 metre – 60w

Drivers and cabling are not covered by the IP65 rating and therefore must be housed indoors in a dry environment. IP65 rating applies to the Neon Flex only.

A 24v LED Transformer is required to power our Neon Flex.

All products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

Technical Documentation

Technical Specs