Syndeo by Tagra | Double Door Trigger | Wired LED Sensor | Recessed or Surface Mounted | IP20

Technical Overview:

• Voltage: 12V and 24V
• Material: Plastic
• Colour: Black
• Cable Length: 2000mm
• IP Rating: IP20
• Installation: Surface Mounted or Recessed (Double Door 38x26x8mm Cut Out)

Product Overview:

This door trigger sensor provides automatic, hands-free lighting control for wardrobes and cabinets. Available in single-door or double-door variants, it allows one or two doors to activate a lighting system from a single control point.

Lights switch on when the door is opened and off when the door is closed, making it ideal for everyday furniture applications. The double-door version enables reliable control across wider openings or paired doors.The sensor can be recessed or surface mounted, offering flexible installation while maintaining a discreet appearance. The sensor heads can be disconnected from the cable to aid installation, allowing easier routing through cabinetry.

For a flush recessed installation, a slot must be prepared in the mounting surface. This is best achieved using a router with an 8 mm bit to match the sensor’s corner radiuses. Refer to the user manual for the exact recess cut-out dimensions.

Designed to plug directly into the master control port of our Plug and Play Syndeo Drivers, a single sensor can control an entire lighting system. Fully plug-and-play with no soldering required, installation is quick and cost-effective. 

Please Note: Compatible with Syndeo Drivers and Components only and not Ready to Connect Components or Drivers.