Syndeo by Tagra | Bluetooth Remote Control for LED | IP20

Specifications:

• Input Voltage: 3V
• Connectivity: Bluetooth
• Sensing Type: Touch
• Transmit Distance: >6M
• Material: PC
• IP Rating: IP20
• Operating Temp: -20°C ~ 40°C
• Dimensions: 131 x 41 x 12.7mm
• Certification: UKCA, CE
• Warranty: 3 Years

Information:

The Syndeo by Tagra Bluetooth Remote Control is a handheld remote that is compatible with our Syndeo CCT LED Module and Syndeo RGB+CCT LED Module specifically. It has various functions that allow you to turn the lights on and off, cycle through presets and control brightness. For CCT control there is specific buttons that allow you to increase and decrease the kelvin temperature. For RGB+CCT control there is specific buttons that have colour presets to allow you to select colours. The remote has a sleek and minimal design and can be used to control your kitchen and living area lighting.

The LED remote uses a bluetooth connection to pair with a Syndeo LED Module. Its simple to pair and only requires a short press on both the remote and module to establish a connection. Powered by a 3V CR2450 battery and able to be controlled from a maximum distance of 20 metres (unobstructed) from the LED module. Comes with UKCA and CE certification and a 3 year warranty as standard.

This product must be used with a CCT LED Module or RGB+CCT LED Module and Syndeo LED Lights in order to operate. The remote can be surface mounted using adhesive tape provided.

Our full range of Syndeo LED Sensors & Remotes includes motion sensors, cabinet door sensors, touch dimmers and a remote control. All use bluetooth connectivity and allow you to control your lighting remotely.

Installation:

Rated at IP20, this product is suitable for indoor use only. Mount the LED remote to a surface using adhesive tape. Connect to the LED module by pressing the mode button, followed by the pair button on the back of the sensor/remote.

Follow the instructions on the user manual for more detailed steps on replacing the battery, recessing and surface mounting, and operating the LED remote.

Required Products:

The list of products below are required in order to properly operate this product:

• Syndeo by Tagra 24V CCT LED Module
• Syndeo by Tagra 24V RGB+CCT LED Module