Tagra | Build LED Neon Flex | Horizontal 11.5 | 11.5x21mm | RGBW | 24V | IP68 | 17Wp/m | Custom

Introducing Our 11.5x21 Horizontal Bend LED Neon Flex – 24V RGBW | Build Series

Part of our specialist Build Series range, this 11.5x21 Horizontal Bend LED Neon Flex – 24V RGBW is a high-performance solution for immersive RGBW control across complex lighting environments. Built for architectural-grade use and designed for direct-view lighting, it’s ideal for smooth curves and striking design lines on façades, water features, marine settings, and creative installations.

Manufactured using a triple co-extrusion silicone process with precision injection moulding, the product features a fully submersible IP68-rated body and is engineered for long-term performance in outdoor, underwater, and high-humidity environments. With an advanced internal light chamber and side-mounted PCB, it delivers dot-free, uniform illumination while minimising lumen loss in a compact format.

This product is supplied by the metre with 100mm cut points, and can be tailored to your project’s specific requirements, including bespoke length, cable direction, and cable entry configuration. It is dimmable via DALI, 0–10V or DMX/RDM systems and backed by a 5-year warranty.

Key Features

• IP68-rated for submersible use and outdoor durability
• Dimensions: 11.5mm (W) x 21mm (H)
• Bend Direction: Horizontal bend only – features a side-mounted PCB
• Lumen Output: Up to 374 lumens per metre (RGB+5000K)
• High efficiency with CRI >90
• Max Run Length: Confirm based on driver & load (not stated in original)
• Sold by the metre, with 100mm cut points – cable length and direction configurable
• Available Colours: RGB+2200K, RGB+2700K, RGB+3000K, RGB+4000K, RGB+5000K
• Other colour temperatures and vertical bend variants available
• Warranty: 5 Years

Specifications

• Voltage: 24V DC
• Typical Power Consumption: 17.0W/m
• LED Density: 60 LEDs per metre
• CRI: >90
• Beam Angle: 120°
• Dimensions: 11.5mm x 21mm
• Lumen Output: Up to 374lm/m (RGB+5000K)
• IP Rating: IP68 – fully submersible, UV-resistant
• Warranty: 5 Years

Installation & Bespoke Options

This LED Neon Flex is supplied as a custom order product. Each unit is cuttable every 100mm and can be tailored to suit project requirements, including cable direction and overall run length. Compatible mounting accessories are available for secure installation.

Required Products

To operate this product effectively, a compatible 24V LED driver is required. Supported dimming protocols include DALI, 0–10V, and DMX/RDM.