Tagra | Joinery LED Neon Flex | Recessed Angled Beam | Cut Anywhere | 10x8.7mm | 24V | IP67 | 9W/m | 5M Kit

Technical Specification

• Application: Bespoke Joinery / Cabinetry & Display Lighting
• Beam Angle: Projects a 120° beam, angled at 10° for precise, directional lighting.
• Bend Direction: Vertical
• Dimensions: 10 x 8.7mm
• Voltage: DC24V
• Power Consumption: 9W/m
• IP Rating: IP20
• Cut points: Cut Anywhere
• Light Output: Up to 416 lm/m
• CRI: 90+
• SDCM: <3
• Max Run Length: 5m
• Installation: Recessed groove mounting for a secure, integrated fit
• Available Colours: 2700K, 2300K, 3000K
• Warranty: 5 Years

Introducing our New Joinery LED Neon Flex – Recessed Angled Beam

Precision Directional Lighting. Seamless Recessed Integration. Tool-Free Customisation.

The Recessed Angled Beam LED Neon Flex features a precision angled beam designed to direct light exactly where it’s needed, making it ideal for bespoke joinery and display lighting applications. With a compact 10mm x 8.7mm recessed design, it installs neatly into cabinetry and shelving for a clean, professional finish.

Unlike standard LED neon flex that requires soldering or fixed-length sections, this neon features a unique solder-free connection method designed for fast, on-site customisation. Simply cut to the required length, insert the rigid conductive plate, glue and seal the end caps, and power from either or both ends. No soldering, no specialist tools and no unnecessary delays — just precise, efficient installation tailored to joinery projects.

Its cut-anywhere technology allows the neon to be trimmed to the exact length needed, ensuring perfect alignment within recessed grooves, no dark sections between runs, no wasted material and a flawless finish every time. Ideal for luxury kitchens, wardrobes, retail shelving, jewellery displays and under-cabinet task lighting, it delivers controlled, glare-free illumination exactly where it’s required.

Kit Contents

• 5m reel with 1m Cable on both ends
• 4 x extra 500m Cable (2 cables left and 2 cables right side)
• 4 pairs of End Caps (left and right side)
• 10ml Silicone Glue
• User Manual

Installation Guidance

A routed groove must be prepared prior to installation to allow the Neon Flex to sit flush within the surface. The required groove dimensions are 8mm (width) x 8.5mm (height).

This Neon Flex can be cut and assembled on-site using the tool-free, solder-free connection method for precise, custom-length installation. Please refer to the installation manual for guidance.

Required Products

• A compatible 24V LED Driver
• Spare End Cap Kit (if needed)

 

Sample Availability

• 50cm sample sections with 30cm pre-attached cable available upon request. Contact our team via phone, email or live chat to request a sample.