Tagra | PI20 | Plaster In | One Wing | 20.4 x 14.5mm | LED Profile | White Channel | Semi Clear Diffuser | 2 Metres

Specifications:

• Dimensions (overall WxH): 46.8mm x 14.5mm - please refer to the dimension drawing for full dimension details
• Max Tape Width: 20mm
• Water Resistance: IP20
• Material: White Aluminium channel, Polycarbonate diffuser
• Anodised Anti-Corrosive Finish
• Suitable for IP65/67 LED strip lights

Applications:

• Ceiling Level Lighting: Create a striking washed lighting effect against ceilings.
• Floor Level Lighting: Illuminate hallways or around the perimeter of rooms.
• Room Corner Lighting: Light corners of rooms to create a washed effect against a wall or highlight architectural features.

Additional information:

• Install using a suitable mounting adhesive or mounting screws
• End caps sold separately in the 'Useful add ons' section above
• 2 Metre lengths available
• Diffuser included
• Recommended mounting screw: M3x16 countersunk self-tapping screw

Plaster in profiles can provide a sleek and modern appearance to spaces. The diffuser helps to evenly distribute light, reducing glare and creating a visually appealing environment.

The diffuser helps scatter and diffuse light, reducing harsh shadows and providing a softer, more uniform illumination. This can lead to more comfortable and visually pleasing lighting conditions.

Hints and tips:

Diffusers

Diffusers will affect the brightness and CCT (colour temperature) of an LED tape when housed in a LED channel or profile. With a semi-clear diffuser 70-75% of the brightness of the installed LED strip light will shine through

As well as the brightness, diffusers will also alter the kelvin temperature of the installed LED strip light by approximately 10%. Opal diffusers will make the kelvin temperature/CCT appear warmer, semi clear diffusers will make the Kelvin Temperature/CCT appear cooler and transparent diffusers will have no effect.

As an example, a 6000K 1000 lumen per metre LED strip light installed inside a metre length of LED channel using an opal diffuser would create a light bar with an overall output of approximately 5600K and 450 to 500 lumens.

Non-spotting finish

To achieve a highly desired non-spotting finish, consider using this profile with an LED tape of more than 120 LEDs per metre or a COB LED strip light. The more LEDs per metre on your chosen strip light, the less chance there will be of a spotting/dotting effect. 

Bespoke lengths available

Ultra LEDs are one of just a few providers in the UK to supply custom channel lengths for easier installation. Simply get in touch for a bespoke quotation.

Perfect for indoor use. 

This profile is made from fully anodized aluminium and is corrosion proof; meaning it's ideal for using indoors in dry and damp environments such as bathrooms, when installed using a suitably IP-rated LED strip light.