Tagra | DMX | 12-24V | LED Decoder | 24 Channel | 4A | RGB+W | IP20

Specifications::

• Input Signal: DMX512 / RDM
• DMX Connection: Screw Terminal, 3-Pin & 5-Pin XLR (Male & Female), RJ45
• Input Voltage: 12V~24V DC
• Input Current: 96.5A
• Output Voltage: 24 x (12-24) VDC
• Output Current: 24 Channel, 4A per Channel 
• Output Power: 24 x (48-96W)
• Output Type: Constant Voltage
• Dimensions (mm): 335L x 135W x 46H
• Warranty: 5 Years

Information:

Featuring a 24 channel constant voltage output, this DMX512 & RDM Decoder is designed for controlling large scale RGBW LED strip lighting installations. With up to 5A per channel, it is well suited for demanding professional lighting installations requiring multiple outputs.

The unit supports both DMX decoder mode and DMX master mode, with RDM functionality for remote configuration. An integrated OLED display with 4-button control allows quick and easy setup of DMX addressing, output modes and performance settings.

Choose between 8-bit (256 levels) or 16-bit (65536 levels) dimming resolution for smooth and precise control. PWM frequency can be adjusted from 500Hz up to 16KHz, making it suitable for camera-sensitive environments. Customisable dimming curves including linear, standard and gamma adjustment (0.1–9.9)

Built-in over-heat, over-load and short circuit protection with automatic recovery and 5 year warranty.

Installation:

Available in IP20 making it suitable for indoor installation. We recommend installing our LED controllers using the mounting points located on the product. Make sure to install the product onto a smooth and clean surface and in a well ventilated area to reduce any chance of over-heating and to prolong the life of the product.

If the total load is high and one constant voltage power supply is insufficient, multiple constant voltage power supplies can be used. Up to 3 power supplies can be connected as inputs, with each supply powering up to 6 loads.

Required Products:

The list of products below are required to properly operate this product:

• DMX Master Control Signal
• 12-24V Constant Voltage Power Supply
• Compatible LED Strip RGB+W