Tagra | DMX | 12-48V | LED Decoder | 3 Channel | 10A | RGB | IP20

Specifications:

• Input Signal: DMX512
• DMX Connection: Green Terminal, 5-Pin XLR (Male & Female), RJ45
• Input Voltage: 12V~48V DC
• Input Current: Max. 30.5A
• Output Voltage: 3 x (12–48)VDC
• Output Current: 3 Channels, 10A per Channel (12/24V) or 8A per Channel (36/48V)
• Output Power: 3 x 360W @ 12V | 3 x 720W @ 24V | 3 x 864W @ 36V | 3 x 1152W @ 48V
• Output Type: Constant Voltage
• Dimensions (mm): 175L x 80W x 45H
• Warranty: 5 Years

Information:

Featuring a 3 channel constant voltage output, this DMX512 & RDM Decoder is designed for controlling RGB LED strip lighting. It supports standard DMX512 protocols and includes RDM functionality, allowing communication between the DMX master and decoder for simplified configuration and remote addressing. Compatible with both 3-pin and 5-pin DMX connections, as well as RJ45, making it easy to integrate into existing DMX installations.

This decoder includes a digital numeric display and 3-button control panel for quick setup, including DMX address selection and output mode configuration. It supports both DMX mode and stand-alone operation, including RGB mode and 3 channel dimmer mode with built-in programmes, allowing operation without a DMX signal when required.

Choose between 8-bit (256 levels) or 16-bit (65536 levels) dimming resolution, along with adjustable dimming curves including linear, logarithmic , standard and gamma adjustment (0.1–9.9). PWM frequency can also be selected between 250Hz and 32000Hz providing flexible performance depending on the application.

Built using high quality components, this unit includes built-in over-heat, over-load and short circuit protection with automatic recovery. Supplied with a 5 year warranty as standard.

Installation:

This product is rated IP20 and is suitable for indoor installation only. We recommend mounting the decoder securely using the built-in mounting points and installing it in a clean, dry and well ventilated area to reduce the risk of overheating and to maximise product lifespan.

Required Products:

The list of products below are required to properly operate this product:

• DMX Master Control Signal
• 12–48V Constant Voltage LED Driver
• Compatible LED Strip RGB