null

12V Eco Bright LED Tape, Warm White 3000K, 60 LEDs p/m, IP20 (50m Drum)

ID: UL2835WW6050M

  • 12V
  • 3000K
  • 5 Watts p/m
  • 550 Lumens p/m
  • Bulk Pricing Available
£139.00
£166.80 (Inc. VAT)
Bulk Pricing:
Buy in bulk and save

Request a bespoke quote

Call us on 0800 088 3300 or send an email to quotations@ultraleds.co.uk — please provide the ID number shown under the product name on the product page.

x

12V Eco Bright LED Tape, Warm White 3000K, 60 LEDs p/m, IP20 (50m Drum)

The Eco Bright LED Strip Tape series comes with a self-adhesive backing which makes installation quick and hassle free.

This robust tape can be cut to any desired length at any of the allocated cut points, and can be extended if required. Simply plug in to the compatible driver using the Easy to Use snap connector compatible with the Syndeo plug and play cabling system. When using the Syndeo multiport driver, multiple runs of this tape can be powered at once. 

Maximum runs of up to 5 metres can be achieved with this tape before visible voltage drops occur.

Eco Bright LED Strips use a more efficient 2835 chip, producing more lumens per watt than old style legacy strip lights currently offered in the mass market today.

12V strip tape works from a 240v mains circuit when being powered by a compatible transformer. Alternatively, the strip units can be wired to a dedicated 12V DC circuit without the need for a transformer. To guarantee the highest efficiency, we advise that you change your existing transformers to LED Drivers guaranteeing compatibility. Please see our quick driver guide below:

What Driver do I need?

We have many easy to use compatible drivers available in various wattages. To work out what driver you will need for each length of LED you can simply multiply the wattage of the tape by the length of LED strip you will be using, this will give you the total wattage the LED strip requires, then simply choose a driver which is at least 10% above this figure.

For this tape range you will require a driver which is above the below figures.

  • 1 metre – More than 6w
  • 2 metre – More than 11w
  • 3 metre – More than 16w
  • 4 metre – More than 22w
  • 5 metre – More than 27w

Which profile can I use?

This LED tape can be housed in profiles with a channel width of 8mm or more. View our recommended profiles below.

Which controller can I use? (optional)

For single colour tape you can use our Standard Range of controllers.

How do I connect?

Simply plug the Easy to Use plug (sold separately) into one of the ports of the Syndeo multiport driver. Alternatively, you can cut the Easy to Use plug off the end of the 2-core wire with scissors and hard wire it in to one of our professional drivers.

Please see our FAQ for more help and useful guides, alternatively contact us for technical help.

Specifications:

  • Supplied in 50m drums
  • LED Type: 2835 Chip
  • Power Consumption: 4.8w per metre
  • Lumens: 550 p/m
  • Voltage: 12v
  • Tape Width: 8mm
  • Colour Temperature: 3000 Kelvins (warm white)
  • Number of LEDs: 60 per metre
  • CRI: >90
  • Water Ingress Rating: IP20 (non waterproof)
  • Cut points: every 5cm
  • Ready Connect amp rating: 5Amp
  • Dimmable: Yes (DALI, DMX, ELV, TRIAC, 0-10V)
  • guarantee: 3 Year

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

Technical Documentation

Technical Specs